Exim Internet Mailer

1. Using a different configuration file

A one-off alternate configuration can be specified by the -C command line option, which may specify a single file or a list of files. However, when -C is used, Exim gives up its root privilege, unless called by root or the Exim user (or unless the argument for -C is identical to the built-in value from CONFIGURE_FILE). -C is useful mainly for checking the syntax of configuration files before installing them. No owner or group checks are done on a configuration file specified by -C.

The privileged use of -C by the Exim user can be locked out by setting ALT_CONFIG_ROOT_ONLY in Local/Makefile when building Exim. However, if you do this, you also lock out the possibility of testing a configuration using -C right through message reception and delivery, even if the caller is root. The reception works, but by that time, Exim is running as the Exim user, so when it re-execs to regain privilege for the delivery, the use of -C causes privilege to be lost. However, root can test reception and delivery using two separate commands (one to put a message on the queue, using -odq, and another to do the delivery, using -M).

If ALT_CONFIG_PREFIX is defined in Local/Makefile, it specifies a prefix string with which any file named in a -C command line option must start. In addition, the file name must not contain the sequence “/../”. There is no default setting for ALT_CONFIG_PREFIX; when it is unset, any file name can be used with -C.

One-off changes to a configuration can be specified by the -D command line option, which defines and overrides values for macros used inside the configuration file. However, like -C, the use of this option by a non-privileged user causes Exim to discard its root privilege. If DISABLE_D_OPTION is defined in Local/Makefile, the use of -D is completely disabled, and its use causes an immediate error exit.

Some sites may wish to use the same Exim binary on different machines that share a file system, but to use different configuration files on each machine. If CONFIGURE_FILE_USE_NODE is defined in Local/Makefile, Exim first looks for a file whose name is the configuration file name followed by a dot and the machine’s node name, as obtained from the uname() function. If this file does not exist, the standard name is tried. This processing occurs for each file name in the list given by CONFIGURE_FILE or -C.

In some esoteric situations different versions of Exim may be run under different effective uids and the CONFIGURE_FILE_USE_EUID is defined to help with this. See the comments in src/EDITME for details.

2. Configuration file format

Exim’s configuration file is divided into a number of different parts. General option settings must always appear at the start of the file. The other parts are all optional, and may appear in any order. Each part other than the first is introduced by the word “begin” followed by the name of the part. The optional parts are:

• ACL: Access control lists for controlling incoming SMTP mail.

• authenticators: Configuration settings for the authenticator drivers. These are concerned with the SMTP AUTH command (see chapter 33).

• routers: Configuration settings for the router drivers. Routers process addresses and determine how the message is to be delivered.

• transports: Configuration settings for the transport drivers. Transports define mechanisms for copying messages to destinations.

• retry: Retry rules, for use when a message cannot be immediately delivered.

• rewrite: Global address rewriting rules, for use when a message arrives and when new addresses are generated during delivery.

• local_scan: Private options for the local_scan() function. If you want to use this feature, you must set

  LOCAL_SCAN_HAS_OPTIONS=yes
  

  in Local/Makefile before building Exim. Full details of the local_scan() facility are given in chapter 41.

Leading and trailing white space in configuration lines is always ignored.

Blank lines in the file, and lines starting with a # character (ignoring leading white space) are treated as comments and are ignored. Note: A # character other than at the beginning of a line is not treated specially, and does not introduce a comment.

Any non-comment line can be continued by ending it with a backslash. Note that the general rule for white space means that trailing white space after the backslash and leading white space at the start of continuation lines is ignored. Comment lines beginning with # (but not empty lines) may appear in the middle of a sequence of continuation lines.

A convenient way to create a configuration file is to start from the default, which is supplied in src/configure.default, and add, delete, or change settings as required.

The ACLs, retry rules, and rewriting rules have their own syntax which is described in chapters 39, 32, and 31, respectively. The other parts of the configuration file have some syntactic items in common, and these are described below, from section 6.10 onwards. Before that, the inclusion, macro, and conditional facilities are described.

3. File inclusions in the configuration file

You can include other files inside Exim’s run time configuration file by using this syntax:

.include <file name>
.include_if_exists <file name>

on a line by itself. Double quotes round the file name are optional. If you use the first form, a configuration error occurs if the file does not exist; the second form does nothing for non-existent files. In all cases, an absolute file name is required.

Includes may be nested to any depth, but remember that Exim reads its configuration file often, so it is a good idea to keep them to a minimum. If you change the contents of an included file, you must HUP the daemon, because an included file is read only when the configuration itself is read.

The processing of inclusions happens early, at a physical line level, so, like comment lines, an inclusion can be used in the middle of an option setting, for example:

hosts_lookup = a.b.c \
               .include /some/file

Include processing happens after macro processing (see below). Its effect is to process the lines of the included file as if they occurred inline where the inclusion appears.

4. Macros in the configuration file

If a line in the main part of the configuration (that is, before the first “begin” line) begins with an upper case letter, it is taken as a macro definition, and must be of the form

<name> = <rest of line>

The name must consist of letters, digits, and underscores, and need not all be in upper case, though that is recommended. The rest of the line, including any continuations, is the replacement text, and has leading and trailing white space removed. Quotes are not removed. The replacement text can never end with a backslash character, but this doesn’t seem to be a serious limitation.

Macros may also be defined between router, transport, authenticator, or ACL definitions. They may not, however, be defined within an individual driver or ACL, or in the local_scan, retry, or rewrite sections of the configuration.

5. Macro substitution

Once a macro is defined, all subsequent lines in the file (and any included files) are scanned for the macro name; if there are several macros, the line is scanned for each in turn, in the order in which the macros are defined. The replacement text is not re-scanned for the current macro, though it is scanned for subsequently defined macros. For this reason, a macro name may not contain the name of a previously defined macro as a substring. You could, for example, define

ABCD_XYZ = <something>
ABCD = <something else>

but putting the definitions in the opposite order would provoke a configuration error. Macro expansion is applied to individual physical lines from the file, before checking for line continuation or file inclusion (see above). If a line consists solely of a macro name, and the expansion of the macro is empty, the line is ignored. A macro at the start of a line may turn the line into a comment line or a .include line.

6. Redefining macros

Once defined, the value of a macro can be redefined later in the configuration (or in an included file). Redefinition is specified by using == instead of =. For example:

MAC =  initial value
...
MAC == updated value

Redefinition does not alter the order in which the macros are applied to the subsequent lines of the configuration file. It is still the same order in which the macros were originally defined. All that changes is the macro’s value. Redefinition makes it possible to accumulate values. For example:

MAC =  initial value
...
MAC == MAC and something added

This can be helpful in situations where the configuration file is built from a number of other files.

7. Overriding macro values

The values set for macros in the configuration file can be overridden by the -D command line option, but Exim gives up its root privilege when -D is used, unless called by root or the Exim user. A definition on the command line using the -D option causes all definitions and redefinitions within the file to be ignored.

8. Example of macro usage

As an example of macro usage, consider a configuration where aliases are looked up in a MySQL database. It helps to keep the file less cluttered if long strings such as SQL statements are defined separately as macros, for example:

ALIAS_QUERY = select mailbox from user where \
              login=${quote_mysql:$local_part};

This can then be used in a redirect router setting like this:

data = ${lookup mysql{ALIAS_QUERY}}

In earlier versions of Exim macros were sometimes used for domain, host, or address lists. In Exim 4 these are handled better by named lists – see section 10.5.

9. Conditional skips in the configuration file

You can use the directives .ifdef, .ifndef, .elifdef, .elifndef, .else, and .endif to dynamically include or exclude portions of the configuration file. The processing happens whenever the file is read (that is, when an Exim binary starts to run).

The implementation is very simple. Instances of the first four directives must be followed by text that includes the names of one or macros. The condition that is tested is whether or not any macro substitution has taken place in the line. Thus:

.ifdef AAA
message_size_limit = 50M
.else
message_size_limit = 100M
.endif

sets a message size limit of 50M if the macro AAA is defined, and 100M otherwise. If there is more than one macro named on the line, the condition is true if any of them are defined. That is, it is an “or” condition. To obtain an “and” condition, you need to use nested .ifdefs.

Although you can use a macro expansion to generate one of these directives, it is not very useful, because the condition “there was a macro substitution in this line” will always be true.

Text following .else and .endif is ignored, and can be used as comment to clarify complicated nestings.

10. Common option syntax

For the main set of options, driver options, and local_scan() options, each setting is on a line by itself, and starts with a name consisting of lower-case letters and underscores. Many options require a data value, and in these cases the name must be followed by an equals sign (with optional white space) and then the value. For example:

qualify_domain = mydomain.example.com

Some option settings may contain sensitive data, for example, passwords for accessing databases. To stop non-admin users from using the -bP command line option to read these values, you can precede the option settings with the word “hide”. For example:

hide mysql_servers = localhost/users/admin/secret-password

For non-admin users, such options are displayed like this:

mysql_servers = <value not displayable>

If “hide” is used on a driver option, it hides the value of that option on all instances of the same driver.

The following sections describe the syntax used for the different data types that are found in option settings.

11. Boolean options

Options whose type is given as boolean are on/off switches. There are two different ways of specifying such options: with and without a data value. If the option name is specified on its own without data, the switch is turned on; if it is preceded by “no_” or “not_” the switch is turned off. However, boolean options may be followed by an equals sign and one of the words “true”, “false”, “yes”, or “no”, as an alternative syntax. For example, the following two settings have exactly the same effect:

queue_only
queue_only = true

The following two lines also have the same (opposite) effect:

no_queue_only
queue_only = false

You can use whichever syntax you prefer.

12. Integer values

If an integer data item starts with the characters “0x”, the remainder of it is interpreted as a hexadecimal number. Otherwise, it is treated as octal if it starts with the digit 0, and decimal if not. If an integer value is followed by the letter K, it is multiplied by 1024; if it is followed by the letter M, it is multiplied by 1024x1024.

When the values of integer option settings are output, values which are an exact multiple of 1024 or 1024x1024 are sometimes, but not always, printed using the letters K and M. The printing style is independent of the actual input format that was used.

13. Octal integer values

The value of an option specified as an octal integer is always interpreted in octal, whether or not it starts with the digit zero. Such options are always output in octal.

14. Fixed point number values

A fixed point number consists of a decimal integer, optionally followed by a decimal point and up to three further digits.

15. Time interval values

A time interval is specified as a sequence of numbers, each followed by one of the following letters, with no intervening white space:

For example, “3h50m” specifies 3 hours and 50 minutes. The values of time intervals are output in the same format. Exim does not restrict the values; it is perfectly acceptable, for example, to specify “90m” instead of “1h30m”.

16. String values

If a string data item does not start with a double-quote character, it is taken as consisting of the remainder of the line plus any continuation lines, starting at the first character after any leading white space, with trailing white space removed, and with no interpretation of the characters in the string. Because Exim removes comment lines (those beginning with #) at an early stage, they can appear in the middle of a multi-line string. The following settings are therefore equivalent:

trusted_users = uucp:mail

trusted_users = uucp:\
                # This comment line is ignored
                mail

If a string does start with a double-quote, it must end with a closing double-quote, and any backslash characters other than those used for line continuation are interpreted as escape characters, as follows:

If a backslash is followed by some other character, including a double-quote character, that character replaces the pair.

Quoting is necessary only if you want to make use of the backslash escapes to insert special characters, or if you need to specify a value with leading or trailing spaces. These cases are rare, so quoting is almost never needed in current versions of Exim. In versions of Exim before 3.14, quoting was required in order to continue lines, so you may come across older configuration files and examples that apparently quote unnecessarily.

17. Expanded strings

Some strings in the configuration file are subjected to string expansion, by which means various parts of the string may be changed according to the circumstances (see chapter 11). The input syntax for such strings is as just described; in particular, the handling of backslashes in quoted strings is done as part of the input process, before expansion takes place. However, backslash is also an escape character for the expander, so any backslashes that are required for that reason must be doubled if they are within a quoted configuration string.

18. User and group names

User and group names are specified as strings, using the syntax described above, but the strings are interpreted specially. A user or group name must either consist entirely of digits, or be a name that can be looked up using the getpwnam() or getgrnam() function, as appropriate.

19. List construction

The data for some configuration options is a list of items, with colon as the default separator. Many of these options are shown with type “string list” in the descriptions later in this document. Others are listed as “domain list”, “host list”, “address list”, or “local part list”. Syntactically, they are all the same; however, those other than “string list” are subject to particular kinds of interpretation, as described in chapter 10.

In all these cases, the entire list is treated as a single string as far as the input syntax is concerned. The trusted_users setting in section 6.16 above is an example. If a colon is actually needed in an item in a list, it must be entered as two colons. Leading and trailing white space on each item in a list is ignored. This makes it possible to include items that start with a colon, and in particular, certain forms of IPv6 address. For example, the list

local_interfaces = 127.0.0.1 : ::::1

contains two IP addresses, the IPv4 address 127.0.0.1 and the IPv6 address ::1.

Note: Although leading and trailing white space is ignored in individual list items, it is not ignored when parsing the list. The space after the first colon in the example above is necessary. If it were not there, the list would be interpreted as the two items 127.0.0.1:: and 1.

Doubling colons in IPv6 addresses is an unwelcome chore, so a mechanism was introduced to allow the separator character to be changed. If a list begins with a left angle bracket, followed by any punctuation character, that character is used instead of colon as the list separator. For example, the list above can be rewritten to use a semicolon separator like this:

local_interfaces = <; 127.0.0.1 ; ::1

This facility applies to all lists, with the exception of the list in log_file_path. It is recommended that the use of non-colon separators be confined to circumstances where they really are needed.

20. Empty items in lists

An empty item at the end of a list is always ignored. In other words, trailing separator characters are ignored. Thus, the list in

senders = user@domain :

contains only a single item. If you want to include an empty string as one item in a list, it must not be the last item. For example, this list contains three items, the second of which is empty:

senders = user1@domain : : user2@domain

Note: There must be white space between the two colons, as otherwise they are interpreted as representing a single colon data character (and the list would then contain just one item). If you want to specify a list that contains just one, empty item, you can do it as in this example:

senders = :

In this case, the first item is empty, and the second is discarded because it is at the end of the list.

21. Format of driver configurations

There are separate parts in the configuration for defining routers, transports, and authenticators. In each part, you are defining a number of driver instances, each with its own set of options. Each driver instance is defined by a sequence of lines like this:

<instance name>:
  <option>
  ...
  <option>

In the following example, the instance name is localuser, and it is followed by three options settings:

localuser:
  driver = accept
  check_local_user
  transport = local_delivery

For each driver instance, you specify which Exim code module it uses – by the setting of the driver option – and (optionally) some configuration settings. For example, in the case of transports, if you want a transport to deliver with SMTP you would use the smtp driver; if you want to deliver to a local file you would use the appendfile driver. Each of the drivers is described in detail in its own separate chapter later in this manual.

You can have several routers, transports, or authenticators that are based on the same underlying driver (each must have a different instance name).

The order in which routers are defined is important, because addresses are passed to individual routers one by one, in order. The order in which transports are defined does not matter at all. The order in which authenticators are defined is used only when Exim, as a client, is searching them to find one that matches an authentication mechanism offered by the server.

Within a driver instance definition, there are two kinds of option: generic and private. The generic options are those that apply to all drivers of the same type (that is, all routers, all transports or all authenticators). The driver option is a generic option that must appear in every definition. The private options are special for each driver, and none need appear, because they all have default values.

The options may appear in any order, except that the driver option must precede any private options, since these depend on the particular driver. For this reason, it is recommended that driver always be the first option.

Driver instance names, which are used for reference in log entries and elsewhere, can be any sequence of letters, digits, and underscores (starting with a letter) and must be unique among drivers of the same type. A router and a transport (for example) can each have the same name, but no two router instances can have the same name. The name of a driver instance should not be confused with the name of the underlying driver module. For example, the configuration lines:

remote_smtp:
  driver = smtp

create an instance of the smtp transport driver whose name is remote_smtp. The same driver code can be used more than once, with different instance names and different option settings each time. A second instance of the smtp transport, with different options, might be defined thus:

special_smtp:
  driver = smtp
  port = 1234
  command_timeout = 10s

The names remote_smtp and special_smtp would be used to reference these transport instances from routers, and these names would appear in log lines.

Comment lines may be present in the middle of driver specifications. The full list of option settings for any particular driver instance, including all the defaulted values, can be extracted by making use of the -bP command line option.