Q0401: I need to have any mail for virt.dom.ain that doesn't match one of the aliases in /usr/lib/aliases.virt delivered to a particular address, for example, postmaster@virt.dom.ain.
A0401: Adding an asterisk to a search type causes Exim to look up ``*'' when the normal lookup fails. So if your aliasing router is something like this:
virtual:
driver = redirect
domains = virt.dom.ain
file = /usr/lib/aliases.virt
search_type = lsearch
no_more
you should change lsearch to lsearch*, and put this in the alias file:
*: postmaster@virt.dom.ain
This solution has the feature that if there are several unknown addresses in the same message, only one copy gets sent to the postmaster, because of Exim's normal de-duplication rules.
NOTE: This solution works only if there is also an entry for postmaster in the alias file, ultimately resolving to an address that is not in virt.dom.ain.
Q0402: How do I arrange for all incoming email for *@some.domain to go into one pop3 mail account? The customer doesn't want to add a list of specific local parts to the system.
A0402: Set up a special transport that writes to the mailbox like this:
special_transport:
driver = appendfile
file = /pop/mailbox
envelope_to_add
return_path_add
delivery_date_add
user = exim
The file will be written as the user exim. Then arrange to route all mail for that domain to that transport, with a router like this:
special_router:
driver = accept
domains = some.domain
transport = special_transport
Q0403: How do I configure Exim to send messages for unknown local users to a central server?
A0403: Assuming you are using something like the default configuration, where local users are processed by the later routers, you should add the following router at the end;
unknown:
driver = manualroute
transport = remote_smtp
route_list = * server.host.name
no_verify
Q0404: How can I arrange for messages submitted by (for example) Majordomo to be handled specially?
A0404: You can use the condition option on a router, with a setting such as
condition = ${if and {{eq {$sender_host_address}{}} \
{eq {$sender_ident}{majordom}}} {yes}{no}}
This first tests for a locally-submitted message, by ensuring there is no sending host address, and then it checks the identity of the user that ran the submitting process.
Q0405: On a host that accepts mail for several domains, do I have to use fully qualified addresses in /etc/aliases or do I have to set up an alias file for each domain?
A0405: You can do it either way. The default aliasing router contains this line:
data = ${lookup{$local_part}lsearch{/etc/aliases}}
which is what does the actual lookup. To make it look up the complete address instead of just the local part, use
data = ${lookup{$local_part@$domain}lsearch{/etc/aliases}}
If you want to use a separate file for each domain, use
data = ${lookup{$local_part}lsearch{/etc/aliases/$domain}}
Q0406: Some of my users are using the .forward to pipe to a shell command which appends to the user's INBOX. How can I forbid this?
A0406: If you allow your users to run shells in pipes, you cannot control which commands they run or which files they write to. However, you should point out to them that writing to an INBOX by arbitrary commands is not interlocked with the MTA and MUAs, and is liable to mess up the contents of the file.
If a user simply wants to choose a specific file for the delivery of messages, this can be done by putting a file name in a .forward file rather than using a pipe, or by using the save command in an Exim filter file.
You can set forbid_pipe on the router, but that will prevent them from running any pipe commands at all. Alternatively, you can restrict which commands they may run in their pipes by setting the allow_commands and/or restrict_to_path options in the address_pipe transport.
Q0407: How can I arrange for a default value when using a query-style lookup such as LDAP or NIS+ to handle aliases?
A0407: Use a second query in the failure part of the original lookup, like this:
data = ${lookup ldap\
{ldap://x.y.z/l=yvr?aliasaddress?sub?(&(mail=$local_part@$domain))}\
{$value}\
{\
${lookup ldap \
{ldap://x.y.z/l=yvr?aliasaddress?sub?(&(mail=default@$domain))}}\
}}
Of course, if the default is a fixed value you can just include it directly.
Q0408: If I don't fully qualify the addresses in a virtual domain's alias file then mail to aliases which also match the local domain get delivered to the local domain.
A0408: Set the qualify_preserve_domain option on the redirect router.
Q0409: I want mail for any local part at certain virtual domains to go to a single address for each domain.
A0409: One way to to this is
virtual:
driver = redirect
data = ${lookup{$domain}lsearch{/etc/virtual}}
The /etc/virtual file contains a list of domains and the addresses to which their mail should be sent. For example:
domain1: postmaster@some.where.else domain2: joe@xyz.plc
If the number of domains is large, using a DBM or cdb file would be more efficient. If the lookup fails to find the domain in the file, the value of the data option is empty, causing the router to decline.
Q0410: How can I make Exim look in the alias NIS map instead of /etc/aliases?
A0410: The default configuration does not use NIS (many hosts don't run it). You need to change this line in the system_aliases router:
data = ${lookup{$local_part}lsearch{/etc/aliases}}
Change it to
data = ${lookup{$local_part}nis{mail.aliases}}
If you want to use /etc/aliases as well as NIS, put this router (with a different name) before or after the default one, depending on which data source you want to take precedence.
Q0411: Why will Exim deliver a message locally to any username that is longer than 8 characters as long as the first 8 characters match one of the local usernames?
A0411: The problem is in your operating system. Exim just calls the getpwnam() function to test a local part for being a local login name. It does not presume to guess the maximum length of user name for the underlying operating system. Many operating systems correctly reject names that are longer than the maximum length; yours is apparently deficient in this regard. To cope with such systems, Exim has an option called max_user_name_length which you can set to the maximum allowed length.
Q0412: Why am I seeing the error bad mode (100664) for /home/test/.forward? I've looked through the documentation but can't see anything to suggest that Exim has to do anything other than read the .forward file.
A0412: For security, Exim checks for mode bits that shouldn't be set, by default 022. You can change this by setting the modemask option of the redirect router that is handling .forward files.
Q0413: When a user's .forward file is syntactially invalid, Exim defers delivery of all messages to that user, which sometimes include the user's own test messages. Can it be told to ignore the .forward file and/or inform the user of the error?
A0413: Setting skip_syntax_errors on the redirect router causes syntax errors to be skipped. When dealing with users' .forward files it is best to combine this with a setting of syntax_errors_to in order to send a message about the error to the user. However, to avoid an infinite cascade of messages, you have to be able to send to an address that bypasses .forward file processing. This can be done by including a router like this one
real_localuser:
driver = accept
check_local_user
transport = local_delivery
prefix = real-
before the redirect router that handles .forward files. This will do an ordinary local delivery without .forward processing, if the local part is prefixed by real-. You can then set something like the following options on the redirect router:
skip_syntax_errors
syntax_errors_to = real-$local_part@$domain
syntax_errors_text = "\
This is an automatically generated message. An error has been \
found\nin your .forward file. Details of the error are reported \
below. While\nthis error persists, messages addressed to you will \
get delivered into\nyour normal mailbox and you will receive a \
copy of this message for\neach one."
A final tidying setting to go with this is a rewriting rule that changes real-username into just username in the headers of the message:
\N^real-([^@]+)@your\.dom\.ain$\N $1@your.dom.ain h
This means that users won't ever see the real- prefix, unless they look at the Envelope-To: header.
Q0414: I have set caseful_local_part on the routers that handle my local domain because my users have upper case letters in their login names, but incoming mail now has to use the correct case. Can I relax this somehow?
A0414: If you really have to live with caseful user names but want incoming local parts to be caseless, then you have to maintain a file, indexed by the lower case forms, that gives the correct case for each login, like this:
admin: Admin steven: Steven mcdonald: McDonald lamanch: LaManche ...
and at the start of the routers that handle your local domain, put one like this:
set_case_router:
driver = redirect
data = ${lookup{${lc:$local_part}}lsearch{/the/file}}
qualify_preserve_domain
For efficiency, you should also set the redirect_router option to cause processing of the changed address to begin at the next router. If you are otherwise using the default configuration, the setting would be
redirect_router = system_aliases
If there are lots of users, then a DBM or cdb file would be more efficient than a linear search. If you are handling several domains, you will have to extend this configuration to cope appropriately.
Q0415: Can I use my existing alias files and forward files as well as procmail and effectively drop in Exim in place of Sendmail ?
A0415: Yes, as long as your alias and forward files don't assume that pipes are going to run under a shell. If they do, you either have to change them, or configure Exim to use a shell (which it doesn't by default).
Q0416: What is quickest way to set up Exim so any message sent to a non-existing user would bounce back with a different message, based on the name of non-existing user?
A0416: Place this router last, so that it catches any local addresses that are not otherwise handled:
non_exist:
driver = accept
transport = non_exist_reply
no_verify
Then add the following transport to the transports section:
non_exist_reply:
driver = autoreply
user = exim
to = $sender_address
subject = User does not exist
text = You sent mail to $local_part. That's not a valid user here. \
The subject was: $subject.
If you want to pick up a message from a file, you can use the file option (use file_expand if you want its contents expanded).
Q0417: What do I need to do to make Exim handle /usr/ucb/vacation processing automatically, so that people could just create a .vacation.msg file in their home directory and not have to edit their .forward file?
A0417: Add a new router like this, immediately before the normal localuser router:
vacation:
driver = accept
check_local_user
require_files = $home/.vacation.msg
transport = vacation_transport
unseen
and a matching new transport like this:
vacation_transport:
driver = pipe
command = /usr/ucb/vacation $local_part
However, some versions of /usr/ucb/vacation do not work properly unless the DBM file(s) it uses are created in advance - it won't create them itself. You also need a way of removing them when the vacation is over.
Another possibility is to use a fixed filter file which is run whenever .vacation.msg exists, for example:
vacation:
driver = redirect
check_local_user
require_files = $home/.vacation.msg
file = /some/central/filter
allow_filter
The filter file should use the if personal check before sending mail, to avoid generating automatic responses to mailing lists. If sending a message is all that it does, this doesn't count as a ``significant'' delivery, so the original message goes on to be delivered as normal.
Yet another possibility is to make use of Exim's autoreply transport, and not use /usr/ucb/vacation at all.
Q0418: I want to use a default entry in my alias file to handle unknown local parts, but it picks up the local parts that the aliases generate. For example, if the alias file is
luke.skywalker: luke ls: luke *: postmaster
then messages addressed to luke.skywalker end up at postmaster.
A0418: The default mechanism works best with virtual domains, where the generated address is not in the same domain. If you just want to pick up all unknown local parts and send them to postmaster, an easier way to do it is to put this as your last router:
unknown:
driver = redirect
data = postmaster
no_verify
Another possibility is to put the redirect router for these aliases after all the other routers, so that local parts which are user names get picked off first. You will need to have two aliasing routers if there are some local parts (e.g. root) which are login names, but which you want to handle as aliases.
Q0419: I have some obsolete domains which people have been warned not to use any more. How can I arrange to delete any mail that is sent to them?
A0419: To reject them at SMTP time, with a customized error message, place statments like this in the ACL:
deny message = The domain $domain is obsolete
domains = lsearch;/etc/exim/obsolete.domains
For messages that don't arrive over SMTP, you can use a router like this to bounce them:
obsolete:
driver = redirect
domains = lsearch;/etc/exim/obsolete.domains
allow_fail
data = :fail: the domain $domain is obsolete
If you just want to throw away mail to those domains, accept them at SMTP time, and use a router like this:
obsolete:
domains = lsearch;/etc/exim/obsolete.domains
data = :blackhole:
Q0420: How can I arrange that mail addressed to anything@something.mydomain.com gets delivered to something@mydomain.com?
A0420: Set up a router like this:
user_from_domain:
driver = redirect
data = ${if match{$domain}{\N^(.+)\.mydomain\.com$\N}\
{$1@mydomain.com}}
Q0421: I can't get a regular expression to work in a local_parts option on one of my routers.
A0421: Have you remembered to protect any backslash and dollar characters in your regex from unwanted expansion? The easiest way is to use the \N facility, like this:
local_parts = \N^0740\d{6}\N
Q0422: How can I arrange for all addresses in a group of domains *.example.com to share the same alias file? I have a number of such groups.
A0422: For a single group you could just hard wire the file name into a router that had
domains = *.example.com
set, to restrict it to the relevant domains. For a number of such groups you can create a file containing the domains, like this:
*.example1.com example1.com *.example2.com example2.com ...
Then create a router like this
domain_aliases:
driver = redirect
domains = partial-lsearch;/that/file
data = ${lookup{$local_part}lsearch*{/etc/aliases.d/$domain_data}}
The variable $domain_data contains the data that was looked up when the domains option was matched, i.e. example1.com, example2.com, etc. in this case.
Q0423: Some of our users have no home directories; the field in the password file contains /no/home/dir. This causes the error failed to stat /no/home/dir (No such file or directory) when Exim tries to look for a .forward file, and the delivery is deferred.
A0423: With the default configuration, you are asking Exim to check for a .forward file in the user's home directory. If no file is found, Exim tries to stat() the home directory. This is so that it will notice a missing NFS home directory, and not treat it as if the .forward file did not exist. This stat() is failing when the home directory really doesn't exist. You should arrange for the redirect router not to run for these special users, by adding the line
condition = ${if eq {$home}{/no/home/dir}{no}{yes}}
Q0424: How can I disable Exim's de-duplication features? I want it to do two deliveries if two different aliases expand to the same address.
A0424: This is not possible. Duplication has other ramifications other than just (in)convenience. Consider:
. Message is addressed to A and to B.
. Both A and B are aliased to C.
. Without de-duplication, two deliveries to C are scheduled.
. One delivery happens, Exim records that it has delivered the message to C.
. The next delivery fails (C's mailbox is over quota, say).
Next time round, Exim wants to know if it has already delivered to C or not, before scheduling a new delivery. Has it? Obviously, if duplicate deliveries are supported, it has to remember not only that it has delivered to C but also the ``history'' of how that delivery happened - in effect an ancestry list back to the original envelope address. This it does not do, and changing it to work in that way would be a lot of work and a big upheaval.
The best way to get duplicate deliveries if you want them is not to use aliases, but to route the addresses directly to a transport, e.g.
duplicates:
driver = accept
local_parts = lsearch;/etc/list/of/special/local/parts
transport = local_delivery
user = exim
Q0425: My users' mailboxes are distributed between several servers according to the first letter of the user name. All the servers receive incoming mail at random. I would like to have the same configuration file for all the servers, which does local delivery for the mailboxes it holds, and sends other addresses to the correct other server. Is this possible?
A0425: It is easiest if you arrange for all the users to have password entries on all the servers. This means that non-existent users can be detected at the first server they reach. Set up a file containing a mapping from the first letter of the user names to the servers where their mailboxes are held. For example:
a: server1 b: server1 c: server2 ...
Before the normal localuser router, place the following router:
mailbox_host:
driver = manualroute
check_local_user
transport = remote_smtp
route_list = * ${lookup{${substr_0_1:$local_part}}lsearch{/etc/mapfile}}
self = pass
This router checks for a local account, then looks up the host from the first character of the local part. If the host is not the local host, the address is routed to the remote_smtp transport, and sent to the correct host. If the host is the local host, the self option causes the router to pass the address to the next router, which does a local delivery.
The router is skipped for local parts that are not the names of local users, and so these addresses fail.
Q0426: One of the things I want to set up is for anything@onedomain to forward to anything@anotherdomain. I tried adding $local_part@anotherdomain to my aliases but it did not expand - it sent it to that literal address.
A0426: If you want to do it that way, you can make it expand by setting the expand option on the redirect router. Another approach is to use a router like this:
forwarddomain:
driver = redirect
domains = onedomain
data = $local_part@anotherdomain
The value of data can, of course, be more complicated, involving lookups etc. if you have lots of different cases.
Q0427: How can I have an address looked up in two different alias files, and delivered to all the addresses that are found?
A0427: Use a router like this:
multi_aliases:
driver = redirect
data = ${lookup{$local_part}lsearch{/etc/aliases1}\
{$value${lookup{$local_part}lsearch{/etc/aliases2}{,$value}}}\
{${lookup{$local_part}lsearch{/etc/aliases2}{$value}fail}}}\
If the first lookup succeeds, the result is its data, followed by the data from the second lookup, if any, separated by a comma. If the first lookup fails, the result is the data from the third lookup (which also looks in the second file), but if this also fails, the entire expansion is forced to fail, thereby causing the router to decline.
Another approach is to use two routers, with the first re-generating the original local part when it succeeds. This won't get processed by the same router again. For example:
multi_aliases1:
driver = redirect
data = ${lookup{$local_part}lsearch{/etc/aliases1}{$value,$local_part}}
multi_aliases2:
data = ${lookup{$local_part}lsearch{/etc/aliases2}}
This scales more easily to three or more alias files.
Q0428: I've converted from Sendmail, and I notice that Exim doesn't make use of the owner- entries in my alias file to change the sender address in outgoing messages to a mailing list.
A0428: If you have an alias file with entries like this:
somelist: a@b, c@d, ... owner-somelist: postmaster
Sendmail assumes that the second entry specifies a new sender address for the first. Exim does not make this assumption. However, you can make it take the same action, by adding
errors_to = owner-$local_part@whatever.domain
to the configuration for your aliasing router. This is fail-safe, because Exim verifies a new sender address before using it. Thus, the change of sender address occurs only when the owner entry exists.
Q0429: I would like to deliver mail addressed to a given domain to local mailboxes, but also to generate messages to the envelope senders.
A0429: You can do this with an ``unseen'' router and an autoreply transport, along the following lines:
# Router
auto_warning_r:
driver = accept
check_local_user
domains = <domains you want to do this for>
condition = ${if eq{$sender_address}{}{no}{yes}}
transport = warning_t
no_verify
unseen
Place this router immediately before the normal localuser router. The unseen option means that the address is still passed on to the next router. The transport is configured like this:
# Transport
warning_t:
driver = autoreply
file = /usr/local/mail/warning.txt
file_expand
from = postmaster@your.domain
to = $sender_address
user = exim
subject = Re: Your mail to $local_part@$domain
Note the use of the condition option to avoid attempting to send a message when there is no sender (that is, when the incoming message is a bounce message). You can of course extend this to include other conditions. If you want to log the sending of messages, you can add
log = /some/file
to the transport and also make use of the once option if you want to send only one message to each sender.
Q0430: Whenever Exim tries to route a local address, it gives a permission denied error for the .forward file, like this:
1998-08-10 16:55:32 0z5y2W-0000B8-00 == xxxx@yyy.zzz <xxxx@yyy.zz>
D=userforward defer (-1): failed to open /home/xxxx/.forward
(userforward router): Permission denied (euid=1234 egid=101)
A0430: Have you remembered to make Exim setuid root?