pcrepattern man page

Return to the PCRE index page.

This page is part of the PCRE HTML documentation. It was generated automatically from the original man page. If there is any nonsense in it, please consult the man page, in case the conversion went wrong.

Note that not all of the features of PCRE are relevant in the context of Exim. In particular, the version of PCRE that is compiled with Exim does not include UTF-8 support, there is no mechanism for changing the options with which the PCRE functions are called, and features such as callout are not accessible.

• PCRE REGULAR EXPRESSION DETAILS
• BACKSLASH
• CIRCUMFLEX AND DOLLAR
• FULL STOP (PERIOD, DOT)
• MATCHING A SINGLE BYTE
• SQUARE BRACKETS AND CHARACTER CLASSES
• POSIX CHARACTER CLASSES
• VERTICAL BAR
• INTERNAL OPTION SETTING
• SUBPATTERNS
• NAMED SUBPATTERNS
• REPETITION
• ATOMIC GROUPING AND POSSESSIVE QUANTIFIERS
• BACK REFERENCES
• ASSERTIONS
• CONDITIONAL SUBPATTERNS
• COMMENTS
• RECURSIVE PATTERNS
• SUBPATTERNS AS SUBROUTINES
• CALLOUTS

The syntax and semantics of the regular expressions supported by PCRE are described below. Regular expressions are also described in the Perl documentation and in a number of books, some of which have copious examples. Jeffrey Friedl's "Mastering Regular Expressions", published by O'Reilly, covers regular expressions in great detail. This description of PCRE's regular expressions is intended as reference material.

The original operation of PCRE was on strings of one-byte characters. However, there is now also support for UTF-8 character strings. To use this, you must build PCRE to include UTF-8 support, and then call pcre_compile() with the PCRE_UTF8 option. How this affects pattern matching is mentioned in several places below. There is also a summary of UTF-8 features in the section on UTF-8 support in the main pcre page.

A regular expression is a pattern that is matched against a subject string from left to right. Most characters stand for themselves in a pattern, and match the corresponding characters in the subject. As a trivial example, the pattern

  The quick brown fox

There are two different sets of metacharacters: those that are recognized anywhere in the pattern except within square brackets, and those that are recognized in square brackets. Outside square brackets, the metacharacters are as follows:

  \      general escape character with several uses
  ^      assert start of string (or line, in multiline mode)
  $      assert end of string (or line, in multiline mode)
  .      match any character except newline (by default)
  [      start character class definition
  |      start of alternative branch
  (      start subpattern
  )      end subpattern
  ?      extends the meaning of (
         also 0 or 1 quantifier
         also quantifier minimizer
  *      0 or more quantifier
  +      1 or more quantifier
         also "possessive quantifier"
  {      start min/max quantifier

  \      general escape character
  ^      negate the class, but only if the first character
  -      indicates character range
  [      POSIX character class (only if followed by POSIX syntax)
  ]      terminates the character class

The backslash character has several uses. Firstly, if it is followed by a non-alphanumeric character, it takes away any special meaning that character may have. This use of backslash as an escape character applies both inside and outside character classes.

For example, if you want to match a * character, you write \* in the pattern. This escaping action applies whether or not the following character would otherwise be interpreted as a metacharacter, so it is always safe to precede a non-alphanumeric with backslash to specify that it stands for itself. In particular, if you want to match a backslash, you write \\.

If a pattern is compiled with the PCRE_EXTENDED option, whitespace in the pattern (other than in a character class) and characters between a # outside a character class and the next newline character are ignored. An escaping backslash can be used to include a whitespace or # character as part of the pattern.

If you want to remove the special meaning from a sequence of characters, you can do so by putting them between \Q and \E. This is different from Perl in that $ and @ are handled as literals in \Q...\E sequences in PCRE, whereas in Perl, $ and @ cause variable interpolation. Note the following examples:

  Pattern            PCRE matches   Perl matches

  \Qabc$xyz\E        abc$xyz        abc followed by the contents of $xyz
  \Qabc\$xyz\E       abc\$xyz       abc\$xyz
  \Qabc\E\$\Qxyz\E   abc$xyz        abc$xyz

A second use of backslash provides a way of encoding non-printing characters in patterns in a visible manner. There is no restriction on the appearance of non-printing characters, apart from the binary zero that terminates a pattern, but when a pattern is being prepared by text editing, it is usually easier to use one of the following escape sequences than the binary character it represents:

  \a        alarm, that is, the BEL character (hex 07)
  \cx       "control-x", where x is any character
  \e        escape (hex 1B)
  \f        formfeed (hex 0C)
  \n        newline (hex 0A)
  \r        carriage return (hex 0D)
  \t        tab (hex 09)
  \ddd      character with octal code ddd, or backreference
  \xhh      character with hex code hh
  \x{hhh..} character with hex code hhh... (UTF-8 mode only)

After \x, from zero to two hexadecimal digits are read (letters can be in upper or lower case). In UTF-8 mode, any number of hexadecimal digits may appear between \x{ and }, but the value of the character code must be less than 2**31 (that is, the maximum hexadecimal value is 7FFFFFFF). If characters other than hexadecimal digits appear between \x{ and }, or if there is no terminating }, this form of escape is not recognized. Instead, the initial \x will be interpreted as a basic hexadecimal escape, with no following digits, giving a character whose value is zero.

Characters whose value is less than 256 can be defined by either of the two syntaxes for \x when PCRE is in UTF-8 mode. There is no difference in the way they are handled. For example, \xdc is exactly the same as \x{dc}.

After \0 up to two further octal digits are read. In both cases, if there are fewer than two digits, just those that are present are used. Thus the sequence \0\x\07 specifies two binary zeros followed by a BEL character (code value 7). Make sure you supply two digits after the initial zero if the pattern character that follows is itself an octal digit.

The handling of a backslash followed by a digit other than 0 is complicated. Outside a character class, PCRE reads it and any following digits as a decimal number. If the number is less than 10, or if there have been at least that many previous capturing left parentheses in the expression, the entire sequence is taken as a back reference. A description of how this works is given later, following the discussion of parenthesized subpatterns.

Inside a character class, or if the decimal number is greater than 9 and there have not been that many capturing subpatterns, PCRE re-reads up to three octal digits following the backslash, and generates a single byte from the least significant 8 bits of the value. Any subsequent digits stand for themselves. For example:

  \040   is another way of writing a space
  \40    is the same, provided there are fewer than 40 previous capturing subpatterns
  \7     is always a back reference
  \11    might be a back reference, or another way of writing a tab
  \011   is always a tab
  \0113  is a tab followed by the character "3"
  \113   might be a back reference, otherwise the character with octal code 113
  \377   might be a back reference, otherwise the byte consisting entirely of 1 bits
  \81    is either a back reference, or a binary zero followed by the two characters "8" and "1"

All the sequences that define a single byte value or a single UTF-8 character (in UTF-8 mode) can be used both inside and outside character classes. In addition, inside a character class, the sequence \b is interpreted as the backspace character (hex 08), and the sequence \X is interpreted as the character "X". Outside a character class, these sequences have different meanings (see below).

The third use of backslash is for specifying generic character types. The following are always recognized:

  \d     any decimal digit
  \D     any character that is not a decimal digit
  \s     any whitespace character
  \S     any character that is not a whitespace character
  \w     any "word" character
  \W     any "non-word" character

These character type sequences can appear both inside and outside character classes. They each match one character of the appropriate type. If the current matching point is at the end of the subject string, all of them fail, since there is no character to match.

For compatibility with Perl, \s does not match the VT character (code 11). This makes it different from the the POSIX "space" class. The \s characters are HT (9), LF (10), FF (12), CR (13), and space (32).

A "word" character is an underscore or any character less than 256 that is a letter or digit. The definition of letters and digits is controlled by PCRE's low-valued character tables, and may vary if locale-specific matching is taking place (see "Locale support" in the pcreapi page). For example, in the "fr_FR" (French) locale, some character codes greater than 128 are used for accented letters, and these are matched by \w.

In UTF-8 mode, characters with values greater than 128 never match \d, \s, or \w, and always match \D, \S, and \W. This is true even when Unicode character property support is available.

When PCRE is built with Unicode character property support, three additional escape sequences to match generic character types are available when UTF-8 mode is selected. They are:

 \p{xx}   a character with the xx property
 \P{xx}   a character without the xx property
 \X       an extended Unicode sequence

If only one letter is specified with \p or \P, it includes all the properties that start with that letter. In this case, in the absence of negation, the curly brackets in the escape sequence are optional; these two examples have the same effect:

  \p{L}
  \pL

  C     Other
  Cc    Control
  Cf    Format
  Cn    Unassigned
  Co    Private use
  Cs    Surrogate

  L     Letter
  Ll    Lower case letter
  Lm    Modifier letter
  Lo    Other letter
  Lt    Title case letter
  Lu    Upper case letter

  M     Mark
  Mc    Spacing mark
  Me    Enclosing mark
  Mn    Non-spacing mark

  N     Number
  Nd    Decimal number
  Nl    Letter number
  No    Other number

  P     Punctuation
  Pc    Connector punctuation
  Pd    Dash punctuation
  Pe    Close punctuation
  Pf    Final punctuation
  Pi    Initial punctuation
  Po    Other punctuation
  Ps    Open punctuation

  S     Symbol
  Sc    Currency symbol
  Sk    Modifier symbol
  Sm    Mathematical symbol
  So    Other symbol

  Z     Separator
  Zl    Line separator
  Zp    Paragraph separator
  Zs    Space separator

Specifying caseless matching does not affect these escape sequences. For example, \p{Lu} always matches only upper case letters.

The \X escape matches any number of Unicode characters that form an extended Unicode sequence. \X is equivalent to

  (?>\PM\pM*)

Matching characters by Unicode property is not fast, because PCRE has to search a structure that contains data for over fifteen thousand characters. That is why the traditional escape sequences such as \d and \w do not use Unicode properties in PCRE.

The fourth use of backslash is for certain simple assertions. An assertion specifies a condition that has to be met at a particular point in a match, without consuming any characters from the subject string. The use of subpatterns for more complicated assertions is described below. The backslashed assertions are:

  \b     matches at a word boundary
  \B     matches when not at a word boundary
  \A     matches at start of subject
  \Z     matches at end of subject or before newline at end
  \z     matches at end of subject
  \G     matches at first matching position in subject

A word boundary is a position in the subject string where the current character and the previous character do not both match \w or \W (i.e. one matches \w and the other matches \W), or the start or end of the string if the first or last character matches \w, respectively.

The \A, \Z, and \z assertions differ from the traditional circumflex and dollar (described in the next section) in that they only ever match at the very start and end of the subject string, whatever options are set. Thus, they are independent of multiline mode. These three assertions are not affected by the PCRE_NOTBOL or PCRE_NOTEOL options, which affect only the behaviour of the circumflex and dollar metacharacters. However, if the startoffset argument of pcre_exec() is non-zero, indicating that matching is to start at a point other than the beginning of the subject, \A can never match. The difference between \Z and \z is that \Z matches before a newline that is the last character of the string as well as at the end of the string, whereas \z matches only at the end.

The \G assertion is true only when the current matching position is at the start point of the match, as specified by the startoffset argument of pcre_exec(). It differs from \A when the value of startoffset is non-zero. By calling pcre_exec() multiple times with appropriate arguments, you can mimic Perl's /g option, and it is in this kind of implementation where \G can be useful.

Note, however, that PCRE's interpretation of \G, as the start of the current match, is subtly different from Perl's, which defines it as the end of the previous match. In Perl, these can be different when the previously matched string was empty. Because PCRE does just one match at a time, it cannot reproduce this behaviour.

If all the alternatives of a pattern begin with \G, the expression is anchored to the starting match position, and the "anchored" flag is set in the compiled regular expression.

Outside a character class, in the default matching mode, the circumflex character is an assertion that is true only if the current matching point is at the start of the subject string. If the startoffset argument of pcre_exec() is non-zero, circumflex can never match if the PCRE_MULTILINE option is unset. Inside a character class, circumflex has an entirely different meaning (see below).

Circumflex need not be the first character of the pattern if a number of alternatives are involved, but it should be the first thing in each alternative in which it appears if the pattern is ever to match that branch. If all possible alternatives start with a circumflex, that is, if the pattern is constrained to match only at the start of the subject, it is said to be an "anchored" pattern. (There are also other constructs that can cause a pattern to be anchored.)

A dollar character is an assertion that is true only if the current matching point is at the end of the subject string, or immediately before a newline character that is the last character in the string (by default). Dollar need not be the last character of the pattern if a number of alternatives are involved, but it should be the last item in any branch in which it appears. Dollar has no special meaning in a character class.

The meaning of dollar can be changed so that it matches only at the very end of the string, by setting the PCRE_DOLLAR_ENDONLY option at compile time. This does not affect the \Z assertion.

The meanings of the circumflex and dollar characters are changed if the PCRE_MULTILINE option is set. When this is the case, they match immediately after and immediately before an internal newline character, respectively, in addition to matching at the start and end of the subject string. For example, the pattern /^abc$/ matches the subject string "def\nabc" (where \n represents a newline character) in multiline mode, but not otherwise. Consequently, patterns that are anchored in single line mode because all branches start with ^ are not anchored in multiline mode, and a match for circumflex is possible when the startoffset argument of pcre_exec() is non-zero. The PCRE_DOLLAR_ENDONLY option is ignored if PCRE_MULTILINE is set.

Note that the sequences \A, \Z, and \z can be used to match the start and end of the subject in both modes, and if all branches of a pattern start with \A it is always anchored, whether PCRE_MULTILINE is set or not.

Outside a character class, a dot in the pattern matches any one character in the subject, including a non-printing character, but not (by default) newline. In UTF-8 mode, a dot matches any UTF-8 character, which might be more than one byte long, except (by default) newline. If the PCRE_DOTALL option is set, dots match newlines as well. The handling of dot is entirely independent of the handling of circumflex and dollar, the only relationship being that they both involve newline characters. Dot has no special meaning in a character class.

Outside a character class, the escape sequence \C matches any one byte, both in and out of UTF-8 mode. Unlike a dot, it can match a newline. The feature is provided in Perl in order to match individual bytes in UTF-8 mode. Because it breaks up UTF-8 characters into individual bytes, what remains in the string may be a malformed UTF-8 string. For this reason, the \C escape sequence is best avoided.

PCRE does not allow \C to appear in lookbehind assertions (described below), because in UTF-8 mode this would make it impossible to calculate the length of the lookbehind.

An opening square bracket introduces a character class, terminated by a closing square bracket. A closing square bracket on its own is not special. If a closing square bracket is required as a member of the class, it should be the first data character in the class (after an initial circumflex, if present) or escaped with a backslash.

A character class matches a single character in the subject. In UTF-8 mode, the character may occupy more than one byte. A matched character must be in the set of characters defined by the class, unless the first character in the class definition is a circumflex, in which case the subject character must not be in the set defined by the class. If a circumflex is actually required as a member of the class, ensure it is not the first character, or escape it with a backslash.

For example, the character class [aeiou] matches any lower case vowel, while [^aeiou] matches any character that is not a lower case vowel. Note that a circumflex is just a convenient notation for specifying the characters that are in the class by enumerating those that are not. A class that starts with a circumflex is not an assertion: it still consumes a character from the subject string, and therefore it fails if the current pointer is at the end of the string.

In UTF-8 mode, characters with values greater than 255 can be included in a class as a literal string of bytes, or by using the \x{ escaping mechanism.

When caseless matching is set, any letters in a class represent both their upper case and lower case versions, so for example, a caseless [aeiou] matches "A" as well as "a", and a caseless [^aeiou] does not match "A", whereas a caseful version would. When running in UTF-8 mode, PCRE supports the concept of case for characters with values greater than 128 only when it is compiled with Unicode property support.

The newline character is never treated in any special way in character classes, whatever the setting of the PCRE_DOTALL or PCRE_MULTILINE options is. A class such as [^a] will always match a newline.

The minus (hyphen) character can be used to specify a range of characters in a character class. For example, [d-m] matches any letter between d and m, inclusive. If a minus character is required in a class, it must be escaped with a backslash or appear in a position where it cannot be interpreted as indicating a range, typically as the first or last character in the class.

It is not possible to have the literal character "]" as the end character of a range. A pattern such as [W-]46] is interpreted as a class of two characters ("W" and "-") followed by a literal string "46]", so it would match "W46]" or "-46]". However, if the "]" is escaped with a backslash it is interpreted as the end of range, so [W-\]46] is interpreted as a class containing a range followed by two other characters. The octal or hexadecimal representation of "]" can also be used to end a range.

Ranges operate in the collating sequence of character values. They can also be used for characters specified numerically, for example [\000-\037]. In UTF-8 mode, ranges can include characters whose values are greater than 255, for example [\x{100}-\x{2ff}].

If a range that includes letters is used when caseless matching is set, it matches the letters in either case. For example, [W-c] is equivalent to [][\\^_`wxyzabc], matched caselessly, and in non-UTF-8 mode, if character tables for the "fr_FR" locale are in use, [\xc8-\xcb] matches accented E characters in both cases. In UTF-8 mode, PCRE supports the concept of case for characters with values greater than 128 only when it is compiled with Unicode property support.

The character types \d, \D, \p, \P, \s, \S, \w, and \W may also appear in a character class, and add the characters that they match to the class. For example, [\dABCDEF] matches any hexadecimal digit. A circumflex can conveniently be used with the upper case character types to specify a more restricted set of characters than the matching lower case type. For example, the class [^\W_] matches any letter or digit, but not underscore.

The only metacharacters that are recognized in character classes are backslash, hyphen (only where it can be interpreted as specifying a range), circumflex (only at the start), opening square bracket (only when it can be interpreted as introducing a POSIX class name - see the next section), and the terminating closing square bracket. However, escaping other non-alphanumeric characters does no harm.

Perl supports the POSIX notation for character classes. This uses names enclosed by [: and :] within the enclosing square brackets. PCRE also supports this notation. For example,

  [01[:alpha:]%]

  alnum    letters and digits
  alpha    letters
  ascii    character codes 0 - 127
  blank    space or tab only
  cntrl    control characters
  digit    decimal digits (same as \d)
  graph    printing characters, excluding space
  lower    lower case letters
  print    printing characters, including space
  punct    printing characters, excluding letters and digits
  space    white space (not quite the same as \s)
  upper    upper case letters
  word     "word" characters (same as \w)
  xdigit   hexadecimal digits

The name "word" is a Perl extension, and "blank" is a GNU extension from Perl 5.8. Another Perl extension is negation, which is indicated by a ^ character after the colon. For example,

  [12[:^digit:]]

In UTF-8 mode, characters with values greater than 128 do not match any of the POSIX character classes.

Vertical bar characters are used to separate alternative patterns. For example, the pattern

  gilbert|sullivan

The settings of the PCRE_CASELESS, PCRE_MULTILINE, PCRE_DOTALL, and PCRE_EXTENDED options can be changed from within the pattern by a sequence of Perl option letters enclosed between "(?" and ")". The option letters are

  i  for PCRE_CASELESS
  m  for PCRE_MULTILINE
  s  for PCRE_DOTALL
  x  for PCRE_EXTENDED

When an option change occurs at top level (that is, not inside subpattern parentheses), the change applies to the remainder of the pattern that follows. If the change is placed right at the start of a pattern, PCRE extracts it into the global options (and it will therefore show up in data extracted by the pcre_fullinfo() function).

An option change within a subpattern affects only that part of the current pattern that follows it, so

  (a(?i)b)c

  (a(?i)b|c)

The PCRE-specific options PCRE_UNGREEDY and PCRE_EXTRA can be changed in the same way as the Perl-compatible options by using the characters U and X respectively. The (?X) flag setting is special in that it must always occur earlier in the pattern than any of the additional features it turns on, even when it is at top level. It is best to put it at the start.

Subpatterns are delimited by parentheses (round brackets), which can be nested. Turning part of a pattern into a subpattern does two things:

1. It localizes a set of alternatives. For example, the pattern

  cat(aract|erpillar|)

For example, if the string "the red king" is matched against the pattern

  the ((red|white) (king|queen))

The fact that plain parentheses fulfil two functions is not always helpful. There are often times when a grouping subpattern is required without a capturing requirement. If an opening parenthesis is followed by a question mark and a colon, the subpattern does not do any capturing, and is not counted when computing the number of any subsequent capturing subpatterns. For example, if the string "the white queen" is matched against the pattern

  the ((?:red|white) (king|queen))

As a convenient shorthand, if any option settings are required at the start of a non-capturing subpattern, the option letters may appear between the "?" and the ":". Thus the two patterns

  (?i:saturday|sunday)
  (?:(?i)saturday|sunday)

Identifying capturing parentheses by number is simple, but it can be very hard to keep track of the numbers in complicated regular expressions. Furthermore, if an expression is modified, the numbers may change. To help with this difficulty, PCRE supports the naming of subpatterns, something that Perl does not provide. The Python syntax (?P<name>...) is used. Names consist of alphanumeric characters and underscores, and must be unique within a pattern.

Named capturing parentheses are still allocated numbers as well as names. The PCRE API provides function calls for extracting the name-to-number translation table from a compiled pattern. There is also a convenience function for extracting a captured substring by name. For further details see the pcreapi documentation.

Repetition is specified by quantifiers, which can follow any of the following items:

  a literal data character
  the . metacharacter
  the \C escape sequence
  the \X escape sequence (in UTF-8 mode with Unicode properties)
  an escape such as \d that matches a single character
  a character class
  a back reference (see next section)
  a parenthesized subpattern (unless it is an assertion)

  z{2,4}

  [aeiou]{3,}

  \d{8}

In UTF-8 mode, quantifiers apply to UTF-8 characters rather than to individual bytes. Thus, for example, \x{100}{2} matches two UTF-8 characters, each of which is represented by a two-byte sequence. Similarly, when Unicode property support is available, \X{3} matches three Unicode extended sequences, each of which may be several bytes long (and they may be of different lengths).

The quantifier {0} is permitted, causing the expression to behave as if the previous item and the quantifier were not present.

For convenience (and historical compatibility) the three most common quantifiers have single-character abbreviations:

  *    is equivalent to {0,}
  +    is equivalent to {1,}
  ?    is equivalent to {0,1}

  (a?)*

By default, the quantifiers are "greedy", that is, they match as much as possible (up to the maximum number of permitted times), without causing the rest of the pattern to fail. The classic example of where this gives problems is in trying to match comments in C programs. These appear between /* and */ and within the comment, individual * and / characters may appear. An attempt to match C comments by applying the pattern

  /\*.*\*/

  /* first comment */  not comment  /* second comment */

However, if a quantifier is followed by a question mark, it ceases to be greedy, and instead matches the minimum number of times possible, so the pattern

  /\*.*?\*/

  \d??\d

If the PCRE_UNGREEDY option is set (an option which is not available in Perl), the quantifiers are not greedy by default, but individual ones can be made greedy by following them with a question mark. In other words, it inverts the default behaviour.

When a parenthesized subpattern is quantified with a minimum repeat count that is greater than 1 or with a limited maximum, more memory is required for the compiled pattern, in proportion to the size of the minimum or maximum.

If a pattern starts with .* or .{0,} and the PCRE_DOTALL option (equivalent to Perl's /s) is set, thus allowing the . to match newlines, the pattern is implicitly anchored, because whatever follows will be tried against every character position in the subject string, so there is no point in retrying the overall match at any position after the first. PCRE normally treats such a pattern as though it were preceded by \A.

In cases where it is known that the subject string contains no newlines, it is worth setting PCRE_DOTALL in order to obtain this optimization, or alternatively using ^ to indicate anchoring explicitly.

However, there is one situation where the optimization cannot be used. When .* is inside capturing parentheses that are the subject of a backreference elsewhere in the pattern, a match at the start may fail, and a later one succeed. Consider, for example:

  (.*)abc\1

When a capturing subpattern is repeated, the value captured is the substring that matched the final iteration. For example, after

  (tweedle[dume]{3}\s*)+

  /(a|(b))+/

With both maximizing and minimizing repetition, failure of what follows normally causes the repeated item to be re-evaluated to see if a different number of repeats allows the rest of the pattern to match. Sometimes it is useful to prevent this, either to change the nature of the match, or to cause it fail earlier than it otherwise might, when the author of the pattern knows there is no point in carrying on.

Consider, for example, the pattern \d+foo when applied to the subject line

  123456bar

If we use atomic grouping for the previous example, the matcher would give up immediately on failing to match "foo" the first time. The notation is a kind of special parenthesis, starting with (?> as in this example:

  (?>\d+)foo

An alternative description is that a subpattern of this type matches the string of characters that an identical standalone pattern would match, if anchored at the current point in the subject string.

Atomic grouping subpatterns are not capturing subpatterns. Simple cases such as the above example can be thought of as a maximizing repeat that must swallow everything it can. So, while both \d+ and \d+? are prepared to adjust the number of digits they match in order to make the rest of the pattern match, (?>\d+) can only match an entire sequence of digits.

Atomic groups in general can of course contain arbitrarily complicated subpatterns, and can be nested. However, when the subpattern for an atomic group is just a single repeated item, as in the example above, a simpler notation, called a "possessive quantifier" can be used. This consists of an additional + character following a quantifier. Using this notation, the previous example can be rewritten as

  \d++foo

The possessive quantifier syntax is an extension to the Perl syntax. It originates in Sun's Java package.

When a pattern contains an unlimited repeat inside a subpattern that can itself be repeated an unlimited number of times, the use of an atomic group is the only way to avoid some failing matches taking a very long time indeed. The pattern

  (\D+|<\d+>)*[!?]

  aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa

  ((?>\D+)|<\d+>)*[!?]

Outside a character class, a backslash followed by a digit greater than 0 (and possibly further digits) is a back reference to a capturing subpattern earlier (that is, to its left) in the pattern, provided there have been that many previous capturing left parentheses.

However, if the decimal number following the backslash is less than 10, it is always taken as a back reference, and causes an error only if there are not that many capturing left parentheses in the entire pattern. In other words, the parentheses that are referenced need not be to the left of the reference for numbers less than 10. See the subsection entitled "Non-printing characters" above for further details of the handling of digits following a backslash.

A back reference matches whatever actually matched the capturing subpattern in the current subject string, rather than anything matching the subpattern itself (see "Subpatterns as subroutines" below for a way of doing that). So the pattern

  (sens|respons)e and \1ibility

  ((?i)rah)\s+\1

Back references to named subpatterns use the Python syntax (?P=name). We could rewrite the above example as follows:

  (?<p1>(?i)rah)\s+(?P=p1)

  (a|(bc))\2

A back reference that occurs inside the parentheses to which it refers fails when the subpattern is first used, so, for example, (a\1) never matches. However, such references can be useful inside repeated subpatterns. For example, the pattern

  (a|b\1)+

An assertion is a test on the characters following or preceding the current matching point that does not actually consume any characters. The simple assertions coded as \b, \B, \A, \G, \Z, \z, ^ and $ are described above.

More complicated assertions are coded as subpatterns. There are two kinds: those that look ahead of the current position in the subject string, and those that look behind it. An assertion subpattern is matched in the normal way, except that it does not cause the current matching position to be changed.

Assertion subpatterns are not capturing subpatterns, and may not be repeated, because it makes no sense to assert the same thing several times. If any kind of assertion contains capturing subpatterns within it, these are counted for the purposes of numbering the capturing subpatterns in the whole pattern. However, substring capturing is carried out only for positive assertions, because it does not make sense for negative assertions.

Lookahead assertions start with (?= for positive assertions and (?! for negative assertions. For example,

  \w+(?=;)

  foo(?!bar)

  (?!foo)bar

If you want to force a matching failure at some point in a pattern, the most convenient way to do it is with (?!) because an empty string always matches, so an assertion that requires there not to be an empty string must always fail.

Lookbehind assertions start with (?<= for positive assertions and (?<! for negative assertions. For example,

  (?<!foo)bar

  (?<=bullock|donkey)

  (?<!dogs?|cats?)

  (?<=ab(c|de))

  (?<=abc|abde)

PCRE does not allow the \C escape (which matches a single byte in UTF-8 mode) to appear in lookbehind assertions, because it makes it impossible to calculate the length of the lookbehind. The \X escape, which can match different numbers of bytes, is also not permitted.

Atomic groups can be used in conjunction with lookbehind assertions to specify efficient matching at the end of the subject string. Consider a simple pattern such as

  abcd$

  ^.*abcd$

  ^(?>.*)(?<=abcd)

  ^.*+(?<=abcd)

Several assertions (of any sort) may occur in succession. For example,

  (?<=\d{3})(?<!999)foo

  (?<=\d{3}...)(?<!999)foo

Assertions can be nested in any combination. For example,

  (?<=(?<!foo)bar)baz

  (?<=\d{3}(?!999)...)foo

It is possible to cause the matching process to obey a subpattern conditionally or to choose between two alternative subpatterns, depending on the result of an assertion, or whether a previous capturing subpattern matched or not. The two possible forms of conditional subpattern are

  (?(condition)yes-pattern)
  (?(condition)yes-pattern|no-pattern)

There are three kinds of condition. If the text between the parentheses consists of a sequence of digits, the condition is satisfied if the capturing subpattern of that number has previously matched. The number must be greater than zero. Consider the following pattern, which contains non-significant white space to make it more readable (assume the PCRE_EXTENDED option) and to divide it into three parts for ease of discussion:

  ( \( )?    [^()]+    (?(1) \) )

If the condition is the string (R), it is satisfied if a recursive call to the pattern or subpattern has been made. At "top level", the condition is false. This is a PCRE extension. Recursive patterns are described in the next section.

If the condition is not a sequence of digits or (R), it must be an assertion. This may be a positive or negative lookahead or lookbehind assertion. Consider this pattern, again containing non-significant white space, and with the two alternatives on the second line:

  (?(?=[^a-z]*[a-z])
  \d{2}-[a-z]{3}-\d{2}  |  \d{2}-\d{2}-\d{2} )

The sequence (?# marks the start of a comment that continues up to the next closing parenthesis. Nested parentheses are not permitted. The characters that make up a comment play no part in the pattern matching at all.

If the PCRE_EXTENDED option is set, an unescaped # character outside a character class introduces a comment that continues up to the next newline character in the pattern.

Consider the problem of matching a string in parentheses, allowing for unlimited nested parentheses. Without the use of recursion, the best that can be done is to use a pattern that matches up to some fixed depth of nesting. It is not possible to handle an arbitrary nesting depth. Perl provides a facility that allows regular expressions to recurse (amongst other things). It does this by interpolating Perl code in the expression at run time, and the code can refer to the expression itself. A Perl pattern to solve the parentheses problem can be created like this:

  $re = qr{\( (?: (?>[^()]+) | (?p{$re}) )* \)}x;

The special item that consists of (? followed by a number greater than zero and a closing parenthesis is a recursive call of the subpattern of the given number, provided that it occurs inside that subpattern. (If not, it is a "subroutine" call, which is described in the next section.) The special item (?R) is a recursive call of the entire regular expression.

For example, this PCRE pattern solves the nested parentheses problem (assume the PCRE_EXTENDED option is set so that white space is ignored):

  \( ( (?>[^()]+) | (?R) )* \)

If this were part of a larger pattern, you would not want to recurse the entire pattern, so instead you could use this:

  ( \( ( (?>[^()]+) | (?1) )* \) )

  (?P<pn> \( ( (?>[^()]+) | (?P>pn) )* \) )

  (aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa()

At the end of a match, the values set for any capturing subpatterns are those from the outermost level of the recursion at which the subpattern value is set. If you want to obtain intermediate values, a callout function can be used (see the next section and the pcrecallout documentation). If the pattern above is matched against

  (ab(cd)ef)

  \( ( ( (?>[^()]+) | (?R) )* ) \)
     ^                        ^
     ^                        ^

Do not confuse the (?R) item with the condition (R), which tests for recursion. Consider this pattern, which matches text in angle brackets, allowing for arbitrary nesting. Only digits are allowed in nested brackets (that is, when recursing), whereas any characters are permitted at the outer level.

  < (?: (?(R) \d++  | [^<>]*+) | (?R)) * >

If the syntax for a recursive subpattern reference (either by number or by name) is used outside the parentheses to which it refers, it operates like a subroutine in a programming language. An earlier example pointed out that the pattern

  (sens|respons)e and \1ibility

  (sens|respons)e and (?1)ibility

Perl has a feature whereby using the sequence (?{...}) causes arbitrary Perl code to be obeyed in the middle of matching a regular expression. This makes it possible, amongst other things, to extract different substrings that match the same pair of parentheses when there is a repetition.

PCRE provides a similar feature, but of course it cannot obey arbitrary Perl code. The feature is called "callout". The caller of PCRE provides an external function by putting its entry point in the global variable pcre_callout. By default, this variable contains NULL, which disables all calling out.

Within a regular expression, (?C) indicates the points at which the external function is to be called. If you want to identify different callout points, you can put a number less than 256 after the letter C. The default value is zero. For example, this pattern has two callout points:

  (?C1)\dabc(?C2)def

During matching, when PCRE reaches a callout point (and pcre_callout is set), the external function is called. It is provided with the number of the callout, the position in the pattern, and, optionally, one item of data originally supplied by the caller of pcre_exec(). The callout function may cause matching to proceed, to backtrack, or to fail altogether. A complete description of the interface to the callout function is given in the pcrecallout documentation.

Last updated: 09 September 2004
Copyright © 1997-2004 University of Cambridge.

Return to the PCRE index page.