The `appendfile' transport delivers a message by appending it to a file in the local file system, or by creating an entirely new file in a specified directory. Single files to which messages are appended can be in the traditional Unix mailbox format, or optionally in the MBX format supported by the Pine MUA and University of Washington IMAP daemon, inter alia. When each message is being delivered as a separate file, `maildir' format can optionally be used to give added protection against failures that happen part-way through the delivery. A third form of separate-file delivery known as `mailstore' is also supported. For all file formats, Exim attempts to create as many levels of directory as necessary, provided that `create_directory' is set.
The code for the optional formats is not included in the Exim binary by default. It is necessary to set SUPPORT_MBX, SUPPORT_MAILDIR and/or SUPPORT_MAILSTORE in `Local/Makefile' to have the appropriate code included.
`Appendfile' can be used by routers as a pseudo-remote transport for putting messages into files for remote delivery by some means other than Exim, though it is more commonly used by directors for local deliveries to users' mailboxes.
It is also used for delivering messages to files or directories whose names are obtained directly from alias, forwarding, or filtering operations. In these cases, `$local_part' contains the local part that was aliased or forwarded, while `$address_file' contains the name of the file or directory.As `appendfile' is a local transport, it is always run in a separate process, under a non-privileged uid and gid, which are set by `setuid()'. In the common local delivery case, these are the uid and gid belonging to the user to whom the mail is being delivered. The current directory is also normally set to the user's home directory. See chapter "Environment for running local transports" for a discussion of the local delivery environment.
If the transport fails for any reason, the message remains on the input queue so that there can be another delivery attempt later. If there is an error while appending to a file (for example, quota exceeded or partition filled), Exim attempts to reset the file's length and last modification time back to what they were before. Exim supports a local quota, for use when the system facility is unavailable or cannot be used for some reason.
Before appending to a file, a number of security checks are made, and the file is locked. A detailed description is given below, after the list of private options.
Option: allow_symlink
Type: boolean
Default: false
By default, `appendfile' will not deliver if the path name for the file is that of a symbolic link. Setting this option relaxes that constraint, but there are security issues involved in the use of symbolic links. Be sure you know what you are doing if you set this. Details of exactly what this option affects are included in the discussion which follows this list of options.
Option: batch
Type: string
Default: "none"
Normally, each address that is directed or routed to an `appendfile' transport is handled separately. In special cases it may be desirable to handle several addresses at once, for example, when passing a message with several addresses to a different mail regime (for example, UUCP), though this is more often done using the `pipe' transport. If this option is set to the string `domain', then all addresses with the same domain that are directed or routed to the transport are handled in a single delivery. If it is set to `all' then multiple domains are batched. The list of addresses is included in the `Envelope-to:' header if `envelope_to_add' is set (see below). The only difference between this option and `bsmtp' is the inclusion of SMTP command lines in the output for `bsmtp'.
Option: batch_max
Type: integer
Default: 100
This limits the number of addresses that can be handled in a batch, and applies to both the `batch' and the `bsmtp' options.
Option: bsmtp
Type: string
Default: "none"
This option is used to set up an `appendfile' transport as a pseudo-remote transport for delivering messages into local files in batch SMTP format for onward transmission by some non-Exim means. It is usually necessary to suppress the default settings of the `prefix' and `suffix' options when using batch SMTP. The value of the option must be one of the strings `none', `one', `domain', or `all'. The first of these turns the feature off. A full description of the batch SMTP mechanism is given in section "Outgoing batched SMTP" in chapter "SMTP processing". When `bstmp' is set, the `batch' option automatically takes the same value. See also the `use_crlf' option.
Option: bsmtp_helo
Type: boolean
Default: false
When this option is set, a HELO line is added to the output at the start of each message written in batch SMTP format. Some software that reads batch SMTP is unhappy without this.
Option: check_group
Type: boolean
Default: false
The group owner of the file is checked to see that it is the same as the group under which the delivery process is running when this option is set. The default setting is unset because the default file mode is 0600, which means that the group is irrelevant.
Option: create_directory
Type: boolean
Default: true
When this option is true, Exim creates any missing superior directories for the file that it is about to write. A created directory's mode is given by the `directory_mode' option.
Option: create_file
Type: string
Default: "anywhere"
This option constrains the location of files that are created by this transport. It must be set to one of the words `anywhere', `inhome', or `belowhome'. In the second and third cases, a home directory must have been set up for the address by the director that handled it. This option isn't useful when an explicit file name is given for normal mailbox deliveries; it is intended for the case when file names have been generated from user's `.forward' files, which are usually handled by an `appendfile' transport called `address_file'. See also `file_must_exist'.
Option: current_directory
Type: string
Default: unset
If this option is set, it specifies the directory to make current when running the delivery process. The string is expanded at the time the transport is run. See chapter "Environment for running local transports" for details of the local delivery environment.
Option: directory
Type: string
Default: unset
This option is mutually exclusive with the `file' option. When it is set, the string is expanded, and the message is delivered into a new file or files in or below the given directory, instead of being appended to a single mailbox file. See section "Operational details for delivery to a new file" for details of this form of delivery.
Option: directory_mode
Type: "octal
Default: integer" 0700
If `appendfile' creates any directories as a result of the `create_directory' option, their mode is specified by this option.
Option: file
Type: string
Default: unset
This option need not be set when `appendfile' is being used to deliver to files whose names are obtained from forwarding, filtering, or aliasing address expansions (by default under the instance name `address_file'), as in those cases the file name is associated with the address. Otherwise, the `file' option must be set unless the `directory' option is set. Either `use_fcntl_lock' or `use_lockfile' (or both) must be set with `file'. If you are using more than one host to deliver over NFS into the same mailboxes, you should always use lock files.
The string value is expanded for each delivery, and must yield an absolute path. If the expansion contains a reference to the `local_part' variable, this is checked to ensure that it does not contain a forward slash character -- to prevent an unexpected change of directory. The most common settings of this option are variations on one of these examples:
file = /var/spool/mail/${local_part}
file = /home/${local_part}/inbox
file = ${home}/inbox
In the first example, all deliveries are done into the same directory. If Exim is configured to use lock files (see `use_lockfile' below) it must be able to create a file in the directory, so the `sticky' bit must be turned on for deliveries to be possible, or alternatively the `group' option can be used to run the delivery under a group id which has write access to the directory.
If there is no file name, or the expansion fails, or a local part contains a forward slash character, a delivery error occurs.
Option: file_must_exist
Type: boolean
Default: false
If this option is true, the file specified by the `file' option must exist, and an error occurs if it does not. Otherwise, it is created if it does not exist.
Option: from_hack
Type: boolean
Default: true
If this option is true, lines in the body of the message that start with the string `From ' are modified by adding a right angle-bracket at their start. This is necessary for traditional BSD-format mailboxes, where such lines might otherwise indicate the start of a new message.
Option: group
Type: string
Default: unset
If this option is set, it specifies the group under whose gid the delivery process is to be run, and, if `check_group' is set, the group owner of an existing file to which the message is to be appended. If the option is not set, a value associated with a user may be used (see below); otherwise a value must have been associated with the address by the director which handled it. If the string contains no $ characters, it is resolved when Exim starts up. Otherwise, the string is expanded at the time the transport is run, and must yield either a digit string or a name which can be looked up using `getgrnam()'.
The `group' option is commonly set for local deliveries on systems where the set of user mailboxes is in a single directory owned by a group such as `mail'. Note that it should not be set on the instance of `appendfile' that is used for deliveries to files specified by users in their forward files (called `address_file' in the default configuration), because such deliveries should take place under the individual users' personal uids and gids.
Option: lock_interval
Type: time
Default: 3s
This specifies the time to wait between attempts to lock the file. See below for details of locking.
Option: lock_retries
Type: integer
Default: 10
This specifies the maximum number of attempts to lock the file. A value of zero is treated as 1. See below for details of locking.
Option: lockfile_mode
Type: "octal
Default: integer" 0600
This specifies the mode of the created lock file, when a lock file is being used (see `use_lockfile').
Option: lockfile_timeout
Type: time
Default: 30m
When a lock file is being used (see `use_lockfile'), if a lock file already exists and is older than this value, it is assumed to have been left behind by accident, and Exim attempts to remove it.
Option: maildir_format
Type: boolean
Default: false
If this option is set with the `directory' option, then the delivery is into a new file in the `maildir' format that is used by some other mail software. The option is available only if SUPPORT_MAILDIR is present in `Local/Makefile'. See section "Operational details for delivery to a new file" below for further details.
Option: maildir_retries
Type: integer
Default: 10
This option specifies the number of times to retry when writing a file in `maildir' format. See section "Operational details for delivery to a new file" below.
Option: maildir_tag
Type: string
Default: unset
This option applies only to deliveries in maildir format, and is described in section "Operational details for delivery to a new file" below.
Option: mailstore_format
Type: boolean
Default: false
If this option is set with the `directory' option, then the delivery is into two new files in `mailstore' format. The option is available only if SUPPORT_MAILSTORE is present in `Local/Makefile'. See section "Operational details for delivery to a new file" below for further details.
Option: mailstore_prefix
Type: string
Default: unset
This option applies only to deliveries in mailstore format, and is described in section "Operational details for delivery to a new file" below.
Option: mailstore_suffix
Type: string
Default: unset
This option applies only to deliveries in mailstore format, and is described in section "Operational details for delivery to a new file" below.
Option: mbx_format
Type: boolean
Default: false
This option is available only if Exim has been compiled with SUPPORT_MBX set in `Local/Makefile'. If `mbx_format' is set with the `file' option, then the message is appended to the mailbox file in MBX format instead of traditional Unix format. This format is supported by Pine4 and its associated IMAP and POP daemons, and is implemented by the `c-client' library that they all use. The `prefix' and `suffix' options are not automatically changed by the use of `mbx_format'; they should normally be set empty.
If none of the locking options are mentioned in the configuration, `use_mbx_lock' is assumed and the other locking options default to false. It is possible to specify the other kinds of locking with `mbx_format', but `use_fcntl_lock' and `use_mbx_lock' are mutually exclusive. MBX locking inter~works with `c-client', providing for shared access to the mailbox. It should not be used if any program that does not use this form of locking is going to access the mailbox, nor should it be used if the mailbox file is NFS mounted, because it works only when the mailbox is accessed from a single host.
If you set `use_fcntl_lock' with an MBX-format mailbox, you cannot use the standard version of `c-client', because as long as it has a mailbox open (this means for the whole of a Pine or IMAP session), Exim will not be able to append messages to it.
Option: mode
Type: "octal
Default: integer" 0600
If the output file is created, it is given this mode. If it already exists and has wider permissions, they are reduced to this mode. If it has narrower permissions, an error occurs unless `mode_fail_narrower' is false. However, if the delivery is the result of a `save' command in a filter file specifing a particular mode, then the mode of the output file is always forced to take that value, and this option is ignored.
Option: mode_fail_narrower
Type: boolean
Default: true
This option applies in the case when an existing mailbox file has a narrower mode than that specified by the `mode' option. If `mode_fail_narrower' is true, the delivery is frozen (`mailbox has the wrong mode'); otherwise Exim continues with the delivery attempt, using the existing mode of the file.
Option: notify_comsat
Type: boolean
Default: false
If this option is true, the `comsat' daemon is notified after every successful delivery to a user mailbox. This is the daemon that notifies logged on users about incoming mail.
Option: prefix
Type: string
Default: "see below"
The string specified here is expanded and output at the start of every message. The default is
prefix = "From ${if def:return_path{$return_path}{MAILER-DAEMON}}\
${tod_bsdinbox}\n"
This line can be suppressed by setting
prefix =
and this is usually necessary when doing batch SMTP deliveries, or delivering into individual files or MBX-format mailboxes.
Option: quota
Type: string
Default: unset
This option imposes a limit on the size of the file to which Exim is appending, or to the total space used in the directory tree if the `directory' option is set. In the latter case, computation of the space used is expensive, as all the files in the directory (and any sub-directories) have to be individually inspected and their sizes summed. Also, there is no interlock against two simultaneous deliveries. It is preferable to use quota mechanisms in the operating system if you can.
The value is expanded, and must then be a numerical value (decimal point allowed), optionally followed by one of the letters K or M. The expansion happens while Exim is running as root or the Exim user, before `setuid()' is called for the delivery, so files that are inaccessible to the end user can be used to hold quota values that are looked up in the expansion. When delivery fails because this quota is exceeded, the handling of the error is as for system quota failures. The value specified is not accurate to the last byte, owing to separator lines and additional headers that may get added during the delivery. See also `quota_warn_threshold'.
Option: quota_filecount
Type: integer
Default: 0
This option applies when the `directory' option is set. It limits the total number of files in the directory (compare the inode limit in system quotas). It can only be used if `quota' is also set.
Option: quota_warn_threshold
Type: string
Default: "0"
This option is expanded in the same way as `quota' (see above). If the resulting value is greater than zero, and delivery of the message causes the size of the file or total space in the directory tree to cross the given threshold, then a warning message is sent. The message itself is specified by the `quota_warn_message' option, and it must start with a `To:' header line containing the recipient(s). A `Subject:' line should also normally be supplied. The `quota' option does not have to be set in order to use this option; they are independent of one another.
Option: quota_warn_message
Type: string
Default: "see below"
See above for the use of this option. If it is not set when `quota_warn_threshold' is set, it defaults to
quota_warn_message = "\ To: $local_part@$domain\n\ Subject: Your mailbox\n\n\ This message is automatically created \ by mail delivery software.\n\n\ The size of your mailbox has exceeded \ a warning threshold that is\n\ set by the system administrator.\n"
Option: require_lockfile
Type: boolean
Default: true
When a lock file is being used (see `use_lockfile') and `require_lockfile' is true, a lock file must be created before delivery can proceed. If the option is not true, failure to create a lock file is not treated as an error, though failure of the `fcntl()' locking function is. This option should always be set when delivering from more than one host over NFS. It is required to be set if the `file' option is set and `use_fcntl_lock' is not set, except when `mbx_format' is set.
Option: retry_use_local_part
Type: boolean
Default: true
When a local delivery suffers a temporary failure, both the local part and the domain are normally used to form a key that is used to determine when next to try the address. This handles common cases such as exceeding a quota, where the failure applies to the specific local part. However, when local delivery is being used to collect messages for onward transmission by some other means, a temporary failure may not depend on the local part at all. Setting this option false causes Exim to use only the domain when handling retries for this transport.
Option: suffix
Type: string
Default: "\n"
The string specified here is expanded and output at the end of every message. The default blank line can be suppressed by setting
suffix =
and this is usually necessary when doing batch SMTP deliveries, or delivering into individual files or MBX-format mailboxes.
Option: use_crlf
Type: boolean
Default: false
This option causes lines to be terminated with the two-character CRLF sequence (carriage return, linefeed) instead of just a linefeed character. In the case of batched SMTP, the byte sequence written to the file is then an exact image of what would be sent down a real SMTP connection.
The contents of the `prefix' and `suffix' options are written verbatim, so must contain their own carriage return characters if these are needed. Since the default values for both `prefix' and `suffix' end with a single linefeed, their values almost always need to be changed if `use_crlf' is set.
Option: use_fcntl_lock
Type: boolean
Default: "see below"
This option controls the use of the `fcntl()' function to lock a file for exclusive use when a message is being appended. It is set by default unless `use_mbx_lock' is set. Otherwise, it should be turned off only if you know that all your MUAs use lock file locking. When `use_fcntl_lock' is off, `use_lockfile' and `require_lockfile' must both be on if `mbx_format' is not set.
Option: use_lockfile
Type: boolean
Default: "see below"
If this option is turned off, Exim does not attempt to create a lock file when appending to a file. Thus the only locking is by `fcntl()'. This option is set by default unless `use_mbx_lock' is set. It is not possible to turn both `use_lockfile' and `use_fcntl_lock' off, except when `mbx_format' is set. You should only turn `use_lockfile' off if you are absolutely sure that every MUA that is ever going to look at your users' mailboxes uses `fcntl()' rather than a lock file, and even then only when you are not delivering over NFS from more than one host. In order to append to an NFS file safely from more than one host, it is necessary to take out a lock before opening the file, and the lock file achieves this. Otherwise, even with `fcntl()' locking, there is a risk of file corruption. See also the `require_lockfile' option.
Option: use_mbx_lock
Type: boolean
Default: "see below"
This option is available only if Exim has been compiled with SUPPORT_MBX set in `Local/Makefile'. Setting the option specifies that special MBX locking rules be used. It is set by default if `mbx_format' is set and none of the locking options are mentioned in the configuration. The locking rules are the same as are used by the `c-client' library that underlies Pine4 and the IMAP4 and POP daemons that come with it (see the discussion below). The rules allow for shared access to the mailbox. However, this kind of locking does not work when the mailbox is NFS mounted.
Option: user
Type: string
Default: unset
If this option is set, it specifies the user under whose uid the delivery process is to be run, and which must be the owner of an existing file to which the message is appended. If the option is not set, a value must have been associated with the address by the director that handled it. If the string contains no $ characters, it is resolved when Exim starts up. Otherwise, the string is expanded at the time the transport is run, and must yield either a digit string or a name which can be looked up using `getpwnam()'. When `getpwnam()' is used, either at start-up time or later, the group id value associated with the user is taken as the value to be used if the `group' option is not set.
Before appending to a file, Exim proceeds as follows:
/tmp/.<device-number>.<inode-number>using the device and inode numbers of the open mailbox file, in accordance with the MBX locking rules. If locking fails, the file is closed, Exim waits for `lock_interval' and then goes back and re-opens it as above and tries to lock it again. This happens up to `lock_retries' times, after which the delivery is deferred.
At the end of delivery, Exim closes the file (which releases the `fcntl()' lock) and then deletes the lock file if one was created.
When the `directory' option is set, each message is delivered into a newly-created file or set of files. No locking is required while writing the message, so the various locking options of the transport are ignored. The `From' line that by default separates messages in a single file is not normally needed, nor is the escaping of message lines that start with `From', and there is no need to ensure a newline at the end of each message. Consequently, the default settings in `appendfile' need changing as follows:
no_from_hack prefix="" suffix=""
There are three different ways in which delivery to individual files can be done, depending on the settings of the `maildir_format' and `mailstore_format' options. Note that code to support maildir and mailstore formats is not included in the binary unless SUPPORT_MAILDIR or SUPPORT_MAILSTORE, respectively, are set in `Local/Makefile'.
In all three cases an attempt is made to create the directory and any necessary sub-directories if they do not exist, provided that the `create_directory' option is set (the default). A created directory's mode is given by the `directory_mode' option. If creation fails, or if the `create_directory' option is not set when creation is required, then the delivery is deferred.
directory = /var/bsmtp/${host}
might be used. A message is written to a file with a temporary name, which is
then renamed when the delivery is complete. The final name is constructed from
the time and the file's inode number, and starts with the letter `q' for
compatibility with `smail'.
Go to the first, previous, next, last section, table of contents.