The `autoreply' transport is not a true transport in that it does not cause the message to be transmitted. Instead, it generates another mail message, usually as the result of mail filtering. A traditional `vacation' message is the standard example.
`Autoreply' is implemented as a local transport so that it runs under the uid and gid of the local user and with appropriate current and home directories (see chapter "Environment for running local transports"). The parameters of the message to be sent can be specified in the configuration by the options described below, but in the common case when `autoreply' is activated as a result of filtering, none of them are normally set, because all the information is obtained from the filter file.
In an attempt to reduce the possibility of message cascades, messages created by the `autoreply' transport always take the form of delivery error messages. That is, the envelope sender field is empty.
There is a subtle difference between directing a message to a pipe transport that generates some text to be returned to the sender, and directing it to an autoreply transport. This difference is noticeable only if more than one address from the same message is so handled. In the case of a pipe, the separate outputs from the different addresses are gathered up and returned to the sender in a single message, while if `autoreply' is used, a separate message is generated for each address passed to it.
The private options of the `autoreply' transport that describe the message are used only when the address passed to it does not contain any reply information. Thus the message is specified entirely by the director or by the transport; it is never built from a mixture of options. The remaining private options (`file_optional', `group', `initgroups', `mode', `return_message', and `user') apply in all cases.
If any of the generic options for manipulating headers (for example, `headers_add') are set on an `autoreply' transport, they apply to the copy of the original message that is included in the generated message when `return_message' is set. They do not apply to the generated message itself.
If the `autoreply' transport receives return code 2 from Exim when it submits the message, indicating that there were no recipients, it does not treat this as an error. This means that autoreplies sent to `$sender_address' when this is empty (because the incoming message is a delivery failure report) do not cause problems.
Option: bcc
Type: string
Default: unset
Specifies the addresses that are to receive `blind carbon copies' of the message when the message is specified by the transport. The string is expanded.
Option: cc
Type: string
Default: unset
Specifies recipients of the message and the contents of the `Cc:' header when the message is specified by the transport. The string is expanded.
Option: file
Type: string
Default: unset
The contents of the file are sent as the body of the message when the message is specified by the transport. The string is expanded. If both `file' and `text' are set, the text string comes first.
Option: file_expand
Type: boolean
Default: false
If this is set, the contents of the file named by the `file' option are subjected to string expansion as they are added to the message.
Option: file_optional
Type: boolean
Default: false
If this option is true, no error is generated if the file named by the `file' option does not exist or cannot be read.
Option: from
Type: string
Default: unset
The contents of the `From:' header when the message is specified by the transport. The string is expanded.
Option: group
Type: string
Default: unset
If this option is set, it specifies the group under whose gid the delivery process is to be run. If it is not set, a value associated with a user may be used (see below); otherwise a value must have been associated with the address by the director which handled it. If the string contains no $ characters, it is resolved when Exim starts up. Otherwise, the string is expanded at the time the transport is run, and must yield either a digit string or a name which can be looked up using `getgrnam()'.
Option: headers
Type: string
Default: unset
Specified additional RFC 822 headers that are to be added to the message when the message is specified by the transport. The string is expanded. Several can be given by using `\n' to separate them. There is no check on the format.
Option: initgroups
Type: boolean
Default: false
If this option is true and the uid is provided by the transport, then the `initgroups()' function is called when running the transport to ensure that any additional groups associated with the uid are set up. By default no additional groups are present.
Option: log
Type: string
Default: unset
This option names a file in which a record of every message sent is logged when the message is specified by the transport. The string is expanded.
Option: mode
Type: "octal
Default: integer" 0600
If either the log file or the `once' file has to be created, this mode is used.
Option: once
Type: string
Default: unset
This option names a DBM database in which a record of each recipient is kept when the message is specified by the transport. The string is expanded. If a potential recipient is already in the database, no message is sent by default. However, if `once_repeat' specifies a time greater than zero, the message is sent if that much time has elapsed since a message was last sent to this recipient. If `once' is unset, the message is always sent.
Option: once_repeat
Type: time
Default: 0s
See `once' above.
Option: reply_to
Type: string
Default: unset
Specifies the contents of the `Reply-to:' header when the message is specified by the transport. The string is expanded.
Option: return_message
Type: boolean
Default: false
If this is set, a copy of the original message is returned with the new message, subject to the maximum size set in the `return_size_limit' general configuration option.
Option: subject
Type: string
Default: unset
The contents of the `Subject:' header when the message is specified by the transport. The string is expanded.
Option: text
Type: string
Default: unset
This specifies a single string to be used as the body of the message when the message is specified by the transport. The string is expanded. If both `text' and `file' are set, the text comes first.
Option: to
Type: string
Default: unset
Specifies recipients of the message and the contents of the `To:' header when the message is specified by the transport. The string is expanded.
Option: user
Type: string
Default: unset
If this option is set, it specifies the user under whose uid the delivery process is to be run. If it is not set, a value must have been associated with the address by the director that handled it. If the string contains no $ characters, it is resolved when Exim starts up. Otherwise, the string is expanded at the time the transport is run, and must yield either a digit string or a name which can be looked up using `getpwnam()'. When `getpwnam()' is used, either at start-up time or later, the group id value associated with the user is taken as the value to be used if the `group' option is not set.
Go to the first, previous, next, last section, table of contents.